After Protection Engine Lube Klotz warehouse TRI Formula For Engine Foam Fliter and Fuel system 1-2oz bottle (you can smell the special sweet Berry smell protection right out of the Bottle.) Great for 2 or 4 stroke engines.
After Run Useage: Helps keep engine running in top condition. Protects bearings and internal parts from corrosion. Prevent gum and varnish build-up. Just pour into exhaust port or glow plug hole after each running. Use 3-6 Drops or More as needed.
The After Run is a Synthetic Lubricant with an anti wear Lube with rust protection that has a quick Burn off for resisting carbon Build up, Helps keep engine running in top condition. Protects bearings and internal parts from corrosion. Special formula to prevent gum and varnish build-up. • Extreme film strength protects Engine parts from metal to metal contact. • Clean Burn technology for low smoke and prevents plug fouling. • Formulated oil displaces moisture prevents corrosion and protects, internal parts. • For use in combustion engines as a After Lube Engine Protection and for short or long term storage.
Fuel system additive Useage, light weight-viscosity synthetic lubricant with high flow ability and improved lubrication. After Protection Engine Lube provides easier starting, smoother transition from low to high speed, and reduced engine temperature on climb-outs, plus added fuel economy. Reduces friction and provides greater protection against wear, while reducing carbon build-up for more stable top-end, wide-open throttle operation. Blends with methanol alcohol and gasoline.
• Reduced Friction and Improved Performance
• TechniPlate® Peak Film Strength and Anti-Scuff protection
• Extreme Load Carrying Capacity engineered to reduce engine wear
• Clean Burn Technology reduces carbon and residue build-up
• Contains Red for easy mixing and racy odor
• Less Drag . . . More Power
DIRECTIONS:
Directions After Run oil Engines: 1) Open throttle 100% 2) Put 3 or more drops into the carburetors venture 3) Turn engine over . ((Fuel System Additive: 5 to 10 Drops per 1floz /.029L (1/2 Bottle to 1/gal)) (Foam Filter: 40 to 50 Drops)
Fuel Additive Compatibility: Blends with methanol alcohol, nitromethane and gasoline and stays in
suspension. Will not blend with petroleum oils R 50 TC W3 etc.., will blend with Klotz Original TechniPlate and
BeNOL Racing Castor. 100% Biodegradable formula.
Fuel Stability: Will dissolve completely in alcohol at ratios up to 5:1.
2-Stroke pre-mix: Do not use in oil injection systems.
R/C 2/4 stroke glow engines: mix at 5 to 10 drops per (1floz /.029L). Can be used with nitromethane mixture
7 to 15 drops per (1floz /.029L).
MSDS look for Part # AR-100
